Product Name: Bitumen Primer
Document Type: Material Safety Data Sheet (MSDS)
Issue Date: October 2012
Version: 1
1. Preparation and Company Identification
Trade Name: Bitumen Primer
Manufacturer / Supplier: HIBERNIABITUMEN Co., LTD
Address: Unit 303, Second Floor, Navab Complex, Navab Safavi St., Esfahan, Iran
Telephone: (+98) 31 3235 5207
2. Composition / Information on Ingredients
| CAS Number |
Chemical Name |
Concentration (%) |
Classification |
| 64742-82-1 |
White Spirit |
60 – 70 |
F; R10 / Xn; R65 / R66 / N; R51/53 |
| 64742-93-4 |
Bitumen |
30 – 40 |
Not classified |
3. Hazard Identification
- Contains petroleum solvent which may cause defatting of the skin and, in severe cases, dermatitis
- Flammable substance (R10)
- Harmful if swallowed, may cause lung damage (R65)
- Toxic to aquatic organisms, with potential long-term adverse environmental effects (R51/53)
- Repeated exposure may result in skin dryness or cracking (R66)
4. First Aid Measures
Inhalation:
Move the affected person to fresh air immediately. If symptoms persist, seek medical attention.
Skin Contact:
Remove contaminated clothing. Clean skin using a suitable proprietary skin cleanser, then wash thoroughly with soap and water. Follow this procedure before eating, drinking, smoking, or using the restroom.
Eye Contact:
Rinse immediately with clean running water for at least 15 minutes. Seek medical attention without delay.
Ingestion:
Seek medical advice immediately. Do NOT induce vomiting. If possible, provide product label or MSDS to medical personnel.
5. Fire Fighting Measures
Suitable Extinguishing Media:
- Dry powder
- Carbon dioxide (CO₂)
- Foam
- Sand or earth
Unsuitable Extinguishing Media:
Special Hazards:
No specific hazards identified under normal conditions.
Protective Equipment for Firefighters:
Wear appropriate protective clothing and respiratory protection if required.
6. Accidental Release Measures
Personal Precautions:
- Stop the source of leakage if safe to do so
- Eliminate all ignition sources (open flames, sparks, smoking)
Environmental Precautions:
- Prevent material from entering drains, sewers, or waterways
Cleanup Methods:
- Absorb spilled material immediately using inert absorbents such as sand, sawdust, or earth
- Collect waste and dispose of it at a licensed disposal facility in accordance with local regulations
